MS Angle Weight Chart 2026 – All Sizes, Kg/m + Free PDF
MS Angle Weight Chart 2026 – All Sizes, Kg/m + Free PDF
Last Updated: October 3, 2026
The MS Angle Weight Chart 2026 is a practical reference for engineers, contractors, fabricators, architects, builders, steel buyers, procurement professionals, and manufacturers who need to estimate the approximate weight of mild steel angles. This guide covers commonly used MS angle sizes, thicknesses, kg/m, kg/ft, equal angles, unequal angles, weight calculation formula, price information, grades, standards, and applications.
MS Angles are L-shaped structural steel sections widely used in construction, industrial fabrication, warehouses, transmission towers, machinery frames, platforms, brackets, staircases, racks, solar structures, and general engineering projects. Knowing the approximate weight per meter helps in material estimation, transportation planning, procurement, fabrication, and project costing.
Important: The weights provided in this article are theoretical or nominal reference values. Actual supplied weight may vary due to rolling tolerances, dimensional tolerances, corner or fillet radius, manufacturing conditions, and applicable specifications. For critical requirements, verify the final material details with the manufacturer and Material Test Certificate (MTC).
Free MS Angle Weight Chart PDF
The MS Angle Weight Chart 2026 PDF provides convenient access to commonly used MS Angle sizes and their corresponding weights. Engineers, fabricators, contractors, steel traders, purchase departments, and project teams can use the PDF for quick offline reference during estimation and procurement.
Download the Free MS Angle Weight Chart 2026 PDF for easy access to equal and unequal angle weight information.
MS Equal Angle Weight Chart
An MS Equal Angle is an L-shaped section where both legs have the same nominal dimensions. For example, a 50×50×6 mm MS angle has two equal 50 mm legs and a nominal thickness of 6 mm.
Equal angles are commonly selected for structural supports, frames, bracing, racks, towers, platforms, brackets, and fabrication work. The required angle size and thickness depend on the structural design, load requirements, connection arrangement, and project specifications.
MS Equal Angle Weight Chart in Kg
| Size (mm) | Thickness (mm) | Weight (kg/m) | Weight (kg/ft) |
|---|---|---|---|
| 25×25 | 3 | 1.10 | 0.34 |
| 25×25 | 5 | 1.80 | 0.55 |
| 40×40 | 3 | 1.80 | 0.55 |
| 40×40 | 5 | 3.00 | 0.91 |
| 40×40 | 6 | 3.50 | 1.07 |
| 50×50 | 5 | 3.80 | 1.16 |
| 50×50 | 6 | 4.50 | 1.37 |
| 60×60 | 6 | 5.40 | 1.65 |
| 65×65 | 6 | 5.80 | 1.77 |
| 75×75 | 8 | 8.90 | 2.71 |
| 90×90 | 10 | 13.40 | 4.08 |
| 100×100 | 12 | 17.70 | 5.39 |
| 150×150 | 16 | 35.80 | 10.91 |
| 200×200 | 20 | 60.00 | 18.29 |
MS Unequal Angle Weight Chart
An MS Unequal Angle has two legs with different nominal dimensions. For example, a 75×50×6 mm MS angle consists of one 75 mm leg, one 50 mm leg, and a 6 mm nominal thickness.
Unequal angles are useful for applications where different leg dimensions or a specific orientation is required. They are used in structural fabrication, supports, frames, brackets, machinery, and engineering structures.
| Size (mm) | Thickness (mm) | Weight (kg/m) | Weight (kg/ft) |
|---|---|---|---|
| 40×25 | 3 | 1.50 | 0.46 |
| 40×25 | 5 | 2.40 | 0.73 |
| 50×30 | 5 | 3.00 | 0.91 |
| 60×40 | 6 | 4.40 | 1.34 |
| 65×45 | 6 | 4.90 | 1.49 |
| 75×50 | 6 | 5.60 | 1.71 |
| 75×50 | 8 | 7.40 | 2.26 |
| 90×60 | 8 | 8.90 | 2.71 |
| 100×75 | 10 | 13.00 | 3.96 |
| 125×75 | 10 | 14.90 | 4.54 |
| 150×75 | 10 | 16.90 | 5.15 |
| 200×150 | 12 | 31.80 | 9.69 |
MS Angle Weight Calculation Formula
The approximate weight of an MS Angle can be calculated using the following theoretical formula:
MS Angle Weight (kg/m) = (Leg A + Leg B − Thickness) × Thickness × 0.00785
Here, Leg A and Leg B are the two leg dimensions in millimeters, thickness is the nominal thickness in millimeters, and 0.00785 is the commonly used density factor based on approximately 7850 kg/m³ steel density.
For a 50×50×6 mm MS angle:
(50 + 50 − 6) × 6 × 0.00785
= 4.42 kg/m approximately
The nominal chart value is approximately 4.50 kg/m. The small difference occurs because the simplified formula does not fully account for rolled geometry, corner radius, fillet radius, and actual sectional dimensions. Therefore, the formula is suitable for preliminary estimation, while applicable section tables and manufacturer information should be used for accurate procurement.
MS Angle Weight Per Meter and Per Foot
MS Angle weight is commonly measured in kg per meter (kg/m) and kg per foot (kg/ft). The conversion from kg/m to kg/ft can be calculated using:
Weight (kg/ft) = Weight (kg/m) × 0.3048
For example, a 50×50×6 mm MS angle with a nominal weight of 4.50 kg/m has an approximate weight of
4.50 × 0.3048 = 1.37 kg/ft
This conversion is useful for fabricators, contractors, estimators, steel buyers, and procurement teams working with different measurement systems.
How to Calculate Total MS Angle Weight
The total approximate weight required for a project can be calculated using:
Total Weight = Weight per Meter × Total Length
For example, if 100 meters of 50×50×6 mm MS Angle are required:
4.50 × 100 = 450 kg
Therefore, the estimated total weight is 450 kg.
For larger projects, cutting waste, fabrication losses, connection requirements, and project-specific allowances may need to be considered separately.
MS Angle Price 2026
The MS Angle price in India in 2026 depends on several factors, including size, thickness, steel grade, manufacturer, order quantity, market conditions, location, GST, freight, packaging, testing, and delivery requirements.
Indicative September 2026 market references show commonly traded MS Angles around the ₹50s per kg, while the exact price varies according to size and commercial conditions. Larger and heavier sections may have different rates from smaller sections.
| MS Angle Size | Indicative Price |
|---|---|
| 25×25×3 mm | ₹52–₹58/kg |
| 40×40×5 mm | ₹52–₹59/kg |
| 50×50×6 mm | ₹55–₹60/kg |
| 65×65×6 mm | ₹55–₹60/kg |
| 75×75×8 mm | ₹55–₹61/kg |
| 90×90×8 mm | ₹55–₹62/kg |
| 100×100×10 mm | ₹56–₹63/kg |
| 150×150×12 mm | ₹56–₹65/kg |
| 200×200×20 mm | ₹58–₹68/kg |
These are indicative market reference ranges rather than fixed quotations. Actual prices can change with market movement, grade, size, quantity, manufacturer, location, freight, GST, and commercial terms. Buyers should request the latest quotation before placing an order.
MS Angle Grades and Standards
IS 2062 is widely used for structural steel requirements in India. IS 2062 E250 is a commonly specified structural steel grade for general structural applications.
Before ordering MS Angles, buyers should confirm the required size, thickness, grade, length, dimensional tolerances, mechanical properties, chemical composition, testing requirements, and MTC requirements.
The applicable dimensional requirements and tolerances should be checked according to the relevant standards and project specifications.
Applications of MS Angles
MS Angles are used across construction, fabrication, infrastructure, manufacturing, and engineering industries. Common applications include:
- Structural steel buildings
- Industrial sheds
- Transmission towers
- Solar structures
- Machinery frames
- Warehouse structures
- Staircases and platforms
- Brackets and supports
- Racks and fabricated frames
- General engineering projects
The appropriate size and thickness should always be selected according to the engineering design and project requirements.
Equal Angle vs Unequal Angle
Equal angles have two legs of the same nominal length, while unequal angles have two legs of different nominal lengths. A 50×50×6 mm section is an example of an equal angle, whereas 75×50×6 mm is an example of an unequal angle.
The selection depends on structural design, orientation, connection requirements, available space, fabrication requirements, and applicable specifications.
Frequently Asked Questions
1. What is the weight of a 50×50×6 MS angle?
The nominal weight is approximately 4.50 kg/m or 1.37 kg/ft.
2. What is the weight of a 65×65×6 MS angle?
The nominal weight is approximately 5.80 kg/m or 1.77 kg/ft.
3. What is the weight of a 75×75×8 MS angle?
The nominal weight is approximately 8.90 kg/m or 2.71 kg/ft.
4. How do you calculate MS Angle weight?
Use the theoretical formula (Leg A + Leg B − Thickness) × Thickness × 0.00785 for approximate kg/m calculations.
5. What is the MS Angle price in India in 2026?
The price varies according to size, thickness, grade, quantity, manufacturer, location, and current steel market conditions.
6. What is IS 2062 E250?
IS 2062 E250 is a commonly specified structural steel grade used for suitable structural applications in India.
7. What is the difference between equal and unequal MS angles?
Equal angles have two equal nominal legs, whereas unequal angles have two different nominal leg dimensions.
8. What are MS Angles used for?
They are used for structural buildings, industrial sheds, warehouses, towers, platforms, machinery frames, brackets, staircases, racks, and general fabrication.
9. What density is used for MS angle calculations?
A theoretical steel density of approximately 7850 kg/m³ is commonly used for preliminary weight calculations.
10. Does actual MS Angle weight always match the chart?
No. Actual supplied weight may vary because of manufacturing and dimensional tolerances. Critical requirements should be verified with the supplier.
Related Steel Weight Charts
For additional steel weight information, users can refer to the GI Pipe Weight Chart, MS Pipe Weight Chart, and MS Channel Weight Chart. These related resources provide useful information for different steel products and can support project estimation, fabrication, and procurement.
The MS Angle Weight Chart 2026—All Sizes, Kg/m + Free PDF is designed as a convenient reference for preliminary weight estimation and material planning. For accurate purchasing, always confirm the required dimensions, grade, quantity, certification, current price, and delivery requirements with the supplier.
VISIT OUR WEBSITE. - https://steeltube.co.in/ms-angle-weight-chart/
Comments
Post a Comment