MS Chequered Plate Weight Per Square Meter 2026: Complete Guide
MS Chequered Plate Weight Per Square Meter 2026: Complete Guide
Mild steel (MS) chequered plates are widely used for industrial flooring, staircases, walkways, platforms, ramps, machine areas, trailers, and fabrication work. Their raised surface pattern provides improved grip compared with a plain steel plate, making them suitable for areas where a durable and textured walking surface is required.
Knowing the MS chequered plate weight per square meter is important for material estimation, transportation planning, structural calculations, inventory management, fabrication, and purchasing. Plate weight mainly depends on thickness, dimensions, steel density, and the raised pattern.
The reference values in this guide are intended for estimation. Actual finished weight may vary according to pattern geometry, manufacturing tolerances, dimensions, material density, and supplier specifications.
MS Chequered Plate Weight Chart 2026
The following are approximate reference weights for commonly used MS chequered plate thicknesses:
| Thickness | Approx. Weight per m² |
|---|---|
| 3 mm | 26.55 kg/m² |
| 4 mm | 34.40 kg/m² |
| 5 mm | 42.25 kg/m² |
| 6 mm | 50.10 kg/m² |
| 8 mm | 65.80 kg/m² |
| 10 mm | 83.40 kg/m² |
| 12 mm | 100.60 kg/m² |
These values are reference figures and should not be considered guaranteed finished weights for every manufacturer or pattern.
MS Chequered Plate Weight Calculator
For a theoretical flat mild steel plate, the commonly used weight formula is:
Weight (kg) = Length (m) × Width (m) × Thickness (mm) × 7.85
A steel density of approximately 7.85 g/cm³, or 7850 kg/m³, is commonly used for theoretical calculations. However, a chequered plate contains a raised pattern, which adds steel material to the surface. Therefore, the finished weight may be higher than the theoretical weight of a plain plate with the same nominal thickness.
Example: 2500 × 1250 × 6 mm Chequered Plate
Consider a plate measuring:
- Length = 2500 mm = 2.5 m
- Width = 1250 mm = 1.25 m
- Thickness = 6 mm
- Area = 2.5 × 1.25 = 3.125 m²
Using the reference chequered plate weight of 50.10 kg/m²:
3.125 × 50.10 = 156.56 kg
Therefore, the approximate reference weight of one 2500 × 1250 × 6 mm MS chequered plate is 156.56 kg. Actual supplied weight should be confirmed from the supplier's final weighment.
Theoretical Weight vs Chequered Plate Weight
Theoretical flat-plate weight and finished chequered plate weight are different because of the raised surface pattern.
For example:
| Thickness | Flat Plate | Chequered Plate |
|---|---|---|
| 3 mm | 23.55 kg/m² | 26.55 kg/m² |
| 4 mm | 31.40 kg/m² | 34.40 kg/m² |
| 5 mm | 39.25 kg/m² | 42.25 kg/m² |
| 6 mm | 47.10 kg/m² | 50.10 kg/m² |
| 8 mm | 62.80 kg/m² | 65.80 kg/m² |
| 10 mm | 78.50 kg/m² | 83.40 kg/m² |
| 12 mm | 94.20 kg/m² | 100.60 kg/m² |
Theoretical values are based on a steel density of 7.85 g/cm³, while the chequered values are reference values. Pattern height, geometry, dimensional tolerances, and manufacturing conditions can affect actual finished mass.
4 × 8 Feet Chequered Plate Weight
A commonly used 4 × 8 feet plate has an area of approximately 2.973 m².
Approximate reference weights include:
| Thickness | Approx. Weight |
|---|---|
| 3 mm | 78.9 kg |
| 5 mm | 125.5 kg |
| 6 mm | 148.8 kg |
| 8 mm | 195.4 kg |
These figures are useful for material planning and transportation estimation, but final dispatch weight should be confirmed with the supplier.
Common MS Chequered Plate Specifications
MS chequered plates may be available in different grades, sizes, thicknesses, and surface patterns depending on project requirements.
Typical specifications include:
- Material: Mild Steel
- Manufacturing: Hot Rolled
- Surface: Raised Chequered Pattern
- Thickness: 3 mm to 12 mm and as required
- Width: 1250 mm, 1500 mm, 2000 mm, and custom
- Length: 2500 mm, 5000 mm, 6000 mm, and custom
- Common Grades: IS 2062, ASTM A36, and equivalent grades
- Patterns: 5-Bar, Diamond, Lentil/Teardrop
Exact availability, dimensions, tolerances, and grade requirements should be confirmed before ordering.
Common Applications of MS Chequered Plates
MS chequered plates are used in many industrial and fabrication applications because of their durable construction and textured surface.
Industrial Flooring: Used for factory floors, maintenance areas, and work platforms.
Staircases: The raised surface can provide improved foot grip on industrial stairs.
Walkways: Suitable for elevated walkways and industrial access areas.
Ramps: Used in ramps and loading areas where a textured surface is required.
Platforms: Commonly used for machine platforms and maintenance structures.
Transportation Equipment: Can be used in selected trailers, truck bodies, and fabricated structures.
Machinery Areas: Suitable for walking and access surfaces around industrial machinery.
Factors Affecting MS Chequered Plate Weight
Several factors can influence the actual supplied weight:
- Thickness: Increasing thickness generally increases weight per square metre.
- Dimensions: Larger plates contain more material and therefore weigh more.
- Pattern: Pattern height and geometry contribute to finished weight.
- Steel Density: Material density can affect theoretical calculations.
- Manufacturing Tolerances: Actual dimensions may vary within applicable tolerances.
- Surface Condition: Scale and finishing can influence final weighment.
- Cutting: Cutting a full plate into smaller pieces changes the weight of each individual piece.
MS Chequered Plate Price 2026
MS chequered plate prices can change according to steel market conditions and product specifications. Thickness, grade, plate size, pattern, order quantity, cutting requirements, location, freight, taxes, and surface condition can all affect the final quotation.
Because steel prices fluctuate, there is no single fixed price applicable to every 2026 purchase. Buyers should provide the required grade, thickness, width, length, pattern, quantity, and delivery location when requesting a quotation.
How to Order MS Chequered Plates
For an accurate quotation, provide complete product details, including:
- Product: MS Chequered Plate
- Grade
- Thickness
- Width and length
- Pattern
- Quantity
- Delivery location
Providing complete specifications helps suppliers calculate the required quantity, estimated weight, availability, and commercial quotation.
Why Choose Sachiya Steel International?
Sachiya Steel International Private Limited supplies steel products for industrial, commercial, fabrication, and engineering requirements. Customers can share their required product, grade, thickness, size, quantity, application, and delivery location for quotation and availability assistance.
For MS chequered plate enquiries:
Phone: +91 9769056007
Email: sales@sachiyasteel.com
Website: www.sachiyasteel.com
Frequently Asked Questions
What is the weight of a 3 mm MS chequered plate per square metre?
The approximate reference weight is 26.55 kg/m².
What is the weight of a 5 mm chequered plate?
The approximate reference weight is 42.25 kg/m².
What is the weight of a 6 mm chequered plate?
The approximate reference weight is 50.10 kg/m².
How do I calculate MS plate weight?
For a theoretical flat plate, use Length × Width × Thickness × 7.85, with length and width in metres and thickness in millimetres.
Why is a chequered plate heavier than a plain plate?
The raised pattern adds material to the plate surface, which can increase the finished weight.
What is the weight of a 4 × 8 feet, 6 mm chequered plate?
Using the reference values in this guide, it is approximately 148.8 kg.
Which grades are commonly used?
Commonly specified grades include IS 2062, ASTM A36, and equivalent grades, depending on project requirements.
Where are MS chequered plates used?
They are commonly used for flooring, platforms, stairs, walkways, ramps, machinery areas, and selected transportation applications.
Does actual weight always match the weight chart?
No. Reference weights can differ from actual supplied weight because of pattern geometry, dimensions, tolerances, and manufacturing conditions.
How can I get the latest MS chequered plate price?
Provide the required grade, thickness, dimensions, pattern, quantity, and delivery location to obtain a quotation.
Conclusion
MS chequered plates are widely used for flooring, stairs, platforms, ramps, walkways, and industrial fabrication. The reference weight ranges from 26.55 kg/m² for 3 mm to 100.60 kg/m² for 12 mm. For theoretical flat steel plates, the standard calculation uses a density of 7.85 g/cm³, while chequered plate calculations should consider the additional raised pattern.
For purchasing, structural planning, transportation, and commercial requirements, always confirm the applicable specification, dimensions, tolerances, and actual supplied weight with the manufacturer or supplier.
VISIT OUR WEBSITE - https://steeltube.co.in/ms-chequered-plate-weight-per-square-meter/
Comments
Post a Comment