MS Angle Weight Chart 2026
MS Angle Weight Chart 2026: Equal & Unequal Angle Weight, Sizes, Formula & Price
Choosing the right structural steel section starts with understanding its dimensions, weight, grade, and intended application. The MS Angle Weight Chart 2026 provides a convenient way to estimate the weight of mild steel angle sections before ordering material, preparing a fabrication plan, calculating transportation requirements, or estimating project costs.
MS angles are L-shaped steel sections manufactured in different leg widths and thicknesses. They are available in two main configurations: equal MS angles, where both legs have the same width, and unequal MS angles, where the two legs have different widths.
Because the weight of an angle increases with its dimensions and thickness, a reliable weight chart makes it easier to compare sections and calculate the approximate quantity of steel required for a project.
What Is an MS Angle?
A mild steel angle is a structural section formed by two steel legs meeting at approximately 90 degrees. Its simple geometry provides useful strength and rigidity while allowing the section to be easily cut, drilled, welded, bolted, and fabricated.
MS angles are commonly specified by leg A × leg B × thickness. For example, 50 × 50 × 6 mm represents an equal angle with two 50 mm legs and a 6 mm nominal thickness. A 75 × 50 × 6 mm section represents an unequal angle with one 75 mm leg and one 50 mm leg.
These sections are widely used in structural fabrication, industrial construction, machinery supports, frames, towers, brackets, platforms, racks, and engineering projects.
Weight note: Chart values are nominal or theoretical references. Actual supplied weight can differ slightly because of rolling tolerances, dimensional variation, corner radius, and manufacturing conditions. Final procurement should be checked against the applicable standard and supplier documentation.
MS Equal Angle Weight Chart 2026
Equal angles are among the most frequently used angle sections because their symmetrical legs are convenient for many structural and fabrication arrangements.
The following table gives commonly used sizes with approximate theoretical weights:
| Size | Thickness | Approx. Weight kg/m | Approx. Weight kg/ft |
|---|---|---|---|
| 25 × 25 mm | 3 mm | 1.10 | 0.34 |
| 25 × 25 mm | 5 mm | 1.80 | 0.55 |
| 40 × 40 mm | 5 mm | 3.00 | 0.91 |
| 40 × 40 mm | 6 mm | 3.50 | 1.07 |
| 50 × 50 mm | 5 mm | 3.80 | 1.16 |
| 50 × 50 mm | 6 mm | 4.50 | 1.37 |
| 60 × 60 mm | 6 mm | 5.40 | 1.65 |
| 65 × 65 mm | 6 mm | 5.80 | 1.77 |
| 65 × 65 mm | 8 mm | 7.70 | 2.35 |
| 75 × 75 mm | 6 mm | 6.80 | 2.07 |
| 75 × 75 mm | 8 mm | 8.90 | 2.71 |
| 75 × 75 mm | 10 mm | 11.00 | 3.35 |
| 90 × 90 mm | 8 mm | 10.80 | 3.29 |
| 90 × 90 mm | 10 mm | 13.40 | 4.08 |
| 100 × 100 mm | 10 mm | 14.90 | 4.54 |
| 100 × 100 mm | 12 mm | 17.70 | 5.39 |
| 150 × 150 mm | 12 mm | 27.20 | 8.29 |
| 150 × 150 mm | 16 mm | 35.80 | 10.91 |
| 200 × 200 mm | 16 mm | 48.50 | 14.78 |
| 200 × 200 mm | 20 mm | 60.00 | 18.29 |
The weight values are useful for estimation, but the exact nominal mass should be confirmed from the relevant section table when material is being purchased for a critical project.
MS Unequal Angle Weight Chart 2026
Unlike an equal angle, an unequal angle has different leg widths. This configuration can be advantageous when one side needs to provide greater bearing, connection area, or structural coverage than the other.
Some commonly referenced unequal angle sizes are:
| Size | Thickness | Approx. Weight kg/m | Approx. Weight kg/ft |
|---|---|---|---|
| 40 × 25 mm | 3 mm | 1.50 | 0.46 |
| 40 × 25 mm | 5 mm | 2.40 | 0.73 |
| 50 × 30 mm | 5 mm | 3.00 | 0.91 |
| 60 × 40 mm | 6 mm | 4.40 | 1.34 |
| 65 × 45 mm | 6 mm | 4.90 | 1.49 |
| 75 × 50 mm | 6 mm | 5.60 | 1.71 |
| 75 × 50 mm | 8 mm | 7.40 | 2.26 |
| 90 × 60 mm | 6 mm | 6.80 | 2.07 |
| 90 × 60 mm | 8 mm | 8.90 | 2.71 |
| 100 × 65 mm | 8 mm | 9.90 | 3.02 |
| 100 × 75 mm | 8 mm | 10.50 | 3.20 |
| 100 × 75 mm | 10 mm | 13.00 | 3.96 |
| 125 × 75 mm | 8 mm | 12.10 | 3.69 |
| 125 × 75 mm | 10 mm | 14.90 | 4.54 |
| 150 × 75 mm | 10 mm | 16.90 | 5.15 |
| 150 × 115 mm | 10 mm | 20.00 | 6.10 |
| 200 × 100 mm | 10 mm | 22.80 | 6.95 |
| 200 × 150 mm | 12 mm | 31.80 | 9.69 |
How MS Angle Weight Is Calculated
The approximate theoretical weight can be obtained from the cross-sectional area and the density of steel. For a quick calculation, the following formula is commonly used:
Weight in kg/m = (A + B − T) × T × 0.00785
Here, A and B represent the two leg dimensions in millimetres, while T represents thickness.
Calculation Example
Consider a 50 × 50 × 6 mm angle:
(50 + 50 − 6) × 6 × 0.00785
= 4.43 kg/m approximately
A published nominal section value may be around 4.50 kg/m. Such a small difference is normal because a simplified formula does not reproduce every detail of a rolled steel profile, particularly the internal corner radius.
For this reason, formulas are best suited to preliminary estimates. Standardized section tables should be preferred for final material calculations.
Converting MS Angle Weight From Kg/M to Kg/Ft
Project documents may use either metric or imperial units. The conversion is straightforward:
Kg/ft = Kg/m × 0.3048
For a 50 × 50 × 6 mm angle weighing 4.50 kg/m:
4.50 × 0.3048 = 1.37 kg/ft
Therefore, its approximate nominal weight is 4.50 kg per metre or 1.37 kg per foot.
Calculating the Total Quantity of Steel
The weight chart becomes particularly useful when estimating the total material required for fabrication.
Use:
Total Weight = Section Weight × Total Length
Suppose a project requires 250 metres of 65 × 65 × 6 mm angle.
Approximate section weight = 5.80 kg/m
Therefore:
5.80 × 250 = 1,450 kg
The estimated requirement would be approximately 1.45 metric tonnes before accounting for cutting losses and fabrication waste.
MS Angle Price in India 2026
There is no single fixed MS Angle price in India because steel rates respond to market conditions and commercial factors. Size, thickness, grade, manufacturer, order volume, location, GST, freight, and delivery terms can all affect the final rate.
For September 2026, an indicative reference range for selected commonly traded MS angles is approximately ₹52–₹68 per kg.
| MS Angle | Indicative September 2026 Range |
|---|---|
| 25 × 25 × 3 mm | ₹52–₹58/kg |
| 40 × 40 × 5 mm | ₹52–₹59/kg |
| 50 × 50 × 6 mm | ₹55–₹60/kg |
| 65 × 65 × 6 mm | ₹55–₹60/kg |
| 75 × 75 × 8 mm | ₹55–₹61/kg |
| 90 × 90 × 8 mm | ₹55–₹62/kg |
| 100 × 100 × 10 mm | ₹56–₹63/kg |
| 150 × 150 × 12 mm | ₹56–₹65/kg |
| 200 × 200 × 20 mm | ₹58–₹68/kg |
These figures are indicative market references, not fixed quotations. Buyers should obtain a current supplier quotation before placing an order.
What Determines the Final MS Angle Cost?
The quoted price can change according to:
- Current steel market conditions
- Section size and thickness
- Structural steel grade
- Manufacturer or mill
- Purchase quantity
- Required length
- Delivery location
- GST and applicable taxes
- Freight charges
- Inspection and testing
- Material certification
- Packaging and handling
For large orders, comparing the complete delivered cost is more useful than comparing only the basic price per kilogram.
MS Angle Grades and Standards
For structural applications, buyers should specify the required grade and standard before requesting quotations. IS 2062 is widely referenced for structural steel in India, with different grades available for different mechanical and project requirements.
E250 is a commonly specified grade for general structural applications.
Dimensional requirements should also be checked against the applicable standards and project specifications. Depending on the requirement, buyers may need to confirm dimensions, tolerances, mechanical properties, chemical composition, testing, and MTC documentation.
Equal Angle or Unequal Angle: Which One Should You Choose?
The selection depends on the structural design rather than simply the weight.
Equal angles are suitable when both legs need similar dimensions and symmetrical geometry is beneficial.
Unequal angles are useful when the design requires different leg widths for connections, support, clearance, or orientation.
For load-bearing structures, the final selection should be based on engineering calculations, connection design, section properties, material grade, and applicable design standards.
Common Uses of MS Angles
MS angles are versatile structural sections used in many industries. Typical applications include:
- Building frames
- Industrial sheds
- Roof trusses
- Structural bracing
- Transmission towers
- Solar support structures
- Machinery frames
- Equipment supports
- Storage racks
- Platforms
- Staircases
- Brackets
- Warehouse structures
- General fabrication
Their availability in different sizes and thicknesses makes them useful for both small fabrication jobs and larger industrial projects.
How to Select the Right MS Angle
Before ordering, clearly define the leg dimensions, thickness, grade, length, quantity, surface condition, standard, certification, and delivery location.
For structural projects, the section should be selected by a qualified engineer based on the expected loads and design requirements. Weight charts help with procurement and estimation but should not be treated as a substitute for structural design calculations.
Frequently Asked Questions
What is the weight of a 50 × 50 × 6 mm MS angle?
Its nominal reference weight is approximately 4.50 kg/m, or around 1.37 kg/ft.
What is the weight of a 75 × 75 × 8 mm angle?
The approximate nominal weight is 8.90 kg/m, equivalent to about 2.71 kg/ft.
How is MS angle weight calculated?
A quick theoretical calculation can be made using (A + B − T) × T × 0.00785.
What is the current MS angle price in India?
For selected sections, an indicative September 2026 market range is approximately ₹52–₹68/kg. Actual quotations vary according to commercial conditions.
What is an equal MS angle?
It is an L-shaped section in which both legs have the same nominal width, such as 50 × 50 mm.
What is an unequal MS angle?
It has two different leg widths, such as 75 × 50 mm.
Can MS angle weight vary from the chart?
Yes. Actual weight can vary within applicable manufacturing and dimensional tolerances.
Conclusion
The MS Angle Weight Chart 2026 helps simplify steel estimation by providing approximate weights for different equal and unequal angle sizes. Understanding kg/m and kg/ft values allows buyers to calculate material quantities, transportation loads, fabrication requirements, and preliminary project costs more efficiently.
The weight formula is useful for quick estimation, while standardized section tables and manufacturer documentation should be used for final calculations. Similarly, MS angle prices should always be confirmed through a current quotation because steel market rates can change.
Sachiya Steel International Private Limited supplies steel products for domestic and international requirements and can assist buyers with MS angles, structural steel sections, specifications, quantities, documentation, and quotations.
For a quotation, provide the angle type, size, thickness, grade, quantity, required length, and delivery location.
VISIT OUR WEBSITE - https://steeltube.co.in/ms-angle-weight-chart/
Comments
Post a Comment