MS Angle Weight Chart 2026 – All Sizes, Kg/m + Free PDF
MS Angle Weight Chart 2026 – All Sizes, Kg/m + Free PDF
Last Updated: September 28, 2026
The MS Angle Weight Chart 2026 is a useful reference for engineers, contractors, fabricators, architects, builders, steel buyers, procurement professionals, and manufacturers who need to calculate the approximate weight of Mild Steel Angles. MS Angles are widely used in construction, structural steelwork, industrial sheds, warehouses, transmission towers, solar structures, machinery frames, platforms, brackets, staircases, and general fabrication.
This guide provides MS Angle sizes, thicknesses, weight in kg/m and kg/ft, equal and unequal angle information, weight calculation formulas, indicative 2026 prices, grades, standards, applications, and buying considerations.
Important: The weights provided are theoretical or nominal reference values. Actual supplied weight may vary because of rolling tolerances, dimensional tolerances, corner or fillet radius, manufacturing conditions, and applicable specifications. For critical projects, verify the final material details with the manufacturer and Material Test Certificate (MTC).
Free MS Angle Weight Chart PDF
For quick project estimation, fabrication, procurement, and offline reference, users can download the MS Angle Weight Chart 2026 PDF. The PDF provides convenient access to equal and unequal MS Angle sizes and their corresponding weights.
Download MS Angle Weight Chart 2026 PDF
The PDF can be useful for engineers, contractors, fabricators, project managers, purchase departments, steel traders, and students who regularly require MS Angle weight information.
MS Equal Angle Weight Chart
An MS Equal Angle is an L-shaped structural steel section in which both legs have the same nominal length. For example, a 50×50×6 mm MS Angle has two 50 mm legs and a nominal thickness of 6 mm.
Equal Angles are commonly used for structural supports, bracing, frames, towers, racks, platforms, brackets, and general fabrication.
| Size (mm) | Thickness (mm) | Weight (kg/m) | Weight (kg/ft) |
|---|---|---|---|
| 25×25 | 3 | 1.10 | 0.34 |
| 40×40 | 5 | 3.00 | 0.91 |
| 50×50 | 6 | 4.50 | 1.37 |
| 65×65 | 6 | 5.80 | 1.77 |
| 75×75 | 8 | 8.90 | 2.71 |
| 90×90 | 10 | 13.40 | 4.08 |
| 100×100 | 12 | 17.70 | 5.39 |
| 150×150 | 16 | 35.80 | 10.91 |
| 200×200 | 20 | 60.00 | 18.29 |
The weight increases as the angle size and thickness increase. For detailed procurement, users should refer to the applicable section dimensions and supplier documentation.
MS Unequal Angle Weight Chart
An MS Unequal Angle has two legs of different nominal lengths. For example, a 75×50×6 mm MS Angle has one 75 mm leg, one 50 mm leg, and a nominal thickness of 6 mm.
Unequal Angles are useful where different leg dimensions or a specific structural orientation are required.
| Size (mm) | Thickness (mm) | Weight (kg/m) | Weight (kg/ft) |
|---|---|---|---|
| 40×25 | 3 | 1.50 | 0.46 |
| 50×30 | 5 | 3.00 | 0.91 |
| 60×40 | 6 | 4.40 | 1.34 |
| 75×50 | 6 | 5.60 | 1.71 |
| 75×50 | 8 | 7.40 | 2.26 |
| 90×60 | 8 | 8.90 | 2.71 |
| 100×75 | 10 | 13.00 | 3.96 |
| 125×75 | 10 | 14.90 | 4.54 |
| 150×75 | 10 | 16.90 | 5.15 |
| 200×150 | 12 | 31.80 | 9.69 |
MS Angle Weight Calculation Formula
The approximate weight of an MS Angle can be calculated using the leg dimensions, thickness, and steel density.
MS Angle Weight (kg/m) = (Leg A + Leg B − Thickness) × Thickness × 0.00785
Where Leg A and Leg B represent the two leg dimensions in millimetres, Thickness is the nominal angle thickness in millimetres, and 0.00785 is the commonly used factor based on approximately 7850 kg/m³ steel density.
For example, for a 50×50×6 mm MS Angle:
(50 + 50 − 6) × 6 × 0.00785
= 4.42 kg/m approximately
The nominal chart value is approximately 4.50 kg/m. The difference occurs because the simplified formula does not completely account for the rolled geometry, including corner and fillet radii. Therefore, the formula is useful for preliminary estimation, while tabulated or manufacturer data should be used for accurate procurement and engineering calculations.
MS Angle Weight Per Meter and Per Foot
MS Angle weight is commonly expressed in kg per meter (kg/m) and kg per foot (kg/ft).
The conversion formula is:
Weight (kg/ft) = Weight (kg/m) × 0.3048
For a 50×50×6 mm MS Angle weighing 4.50 kg/m:
4.50 × 0.3048 = 1.37 kg/ft approximately
This conversion is useful for contractors, fabricators, steel buyers, and estimators working with metric and imperial measurements.
MS Angle Price 2026
The MS Angle price in India in 2026 can vary according to steel market conditions, raw material costs, angle size, thickness, grade, manufacturer, order quantity, location, GST, freight, testing, packaging, and delivery requirements.
Indicative September 2026 market references for commonly traded sizes are around the ₹50s per kg. For example, smaller and medium sizes may be approximately ₹52–₹62/kg, while larger sections may reach approximately ₹65–₹68/kg depending on specifications and commercial conditions.
These prices are indicative market references and should not be treated as fixed quotations. Buyers should request a fresh quotation before placing an order.
MS Angle Grades and Standards
IS 2062 is widely used for structural steel products in India. IS 2062 E250 is a commonly specified structural steel grade for general structural applications.
The appropriate grade depends on the mechanical properties, project requirements, testing requirements, and applicable specifications.
The dimensions and tolerances should also be checked against the relevant standards and project requirements. Before purchasing, confirm the size, thickness, grade, length, dimensional tolerances, mechanical properties, chemical composition, testing requirements, and MTC requirements.
Applications of MS Angles
MS Angles are used across construction, infrastructure, fabrication, manufacturing, and general engineering.
Common applications include:
Structural steel buildings
Industrial sheds
Transmission towers
Solar structures
Machinery frames
Warehouse structures
Staircases and platforms
Brackets and supports
Racks and frames
General fabrication
Infrastructure projects
Their selection should always be based on the applicable engineering design and project specifications.
Equal Angle vs Unequal Angle
Equal Angles have two legs of the same nominal length, while unequal Angles have two legs with different nominal lengths. A 50×50×6 mm section is an example of an equal angle, whereas 75×50×6 mm is an example of an unequal angle.
The choice between equal and unequal angles depends on the structural design, orientation, connection requirements, available space, and load conditions.
How to Calculate Total MS Angle Weight
The total approximate weight can be calculated using:
Total Weight = Weight per Meter × Total Length
For example, if 100 meters of 50×50×6 mm MS Angle are required:
4.50 × 100 = 450 kg
Therefore, the estimated material weight is 450 kg. For large projects, cutting waste, fabrication losses, connection details, and project-specific allowances should also be considered.
Frequently Asked Questions
1. What is the weight of a 50×50×6 MS Angle?
The nominal weight is approximately 4.50 kg/m or 1.37 kg/ft.
2. What is the weight of a 65×65×6 MS Angle?
The nominal weight is approximately 5.80 kg/m or 1.77 kg/ft.
3. What is the weight of a 75×75×8 MS Angle?
The nominal weight is approximately 8.90 kg/m or 2.71 kg/ft.
4. How is MS Angle weight calculated?
Use the theoretical formula (Leg A + Leg B − Thickness) × Thickness × 0.00785 to estimate kg/m.
5. What is the MS Angle price in India in 2026?
Prices vary according to size, thickness, grade, quantity, manufacturer, location, and market conditions. A fresh quotation should be obtained before purchasing.
6. What is IS 2062 E250?
IS 2062 E250 is a commonly specified structural steel grade used for structural applications in India.
7. What is the difference between equal and unequal angles?
Equal Angles have two equal nominal leg dimensions, while unequal Angles have different leg dimensions.
8. What are MS Angles used for?
They are used in structural buildings, industrial sheds, warehouses, towers, solar structures, machinery frames, platforms, brackets, staircases, and fabrication.
9. What density is used for MS Angle calculations?
A theoretical density of approximately 7850 kg/m³ is commonly used for preliminary steel weight calculations.
10. Does actual weight always match the chart?
No. Actual supplied weight can vary because of manufacturing and dimensional tolerances. Critical requirements should be verified with the supplier.
Related Steel Weight Charts
For additional steel weight information, readers can explore the GI Pipe Weight Chart, MS Pipe Weight Chart, and MS Channel Weight Chart. These resources provide additional weight information for different steel products and can assist with project estimation and procurement.
The MS Angle Weight Chart 2026 is designed as a convenient reference for weight estimation, fabrication, project planning, and purchasing. Always verify final material specifications, tolerances, certification, and commercial pricing with the supplier before placing an order.
VISIT OUR WEBSITE - https://steeltube.co.in/ms-angle-weight-chart/
Comments
Post a Comment